Interim checks of coordinate measuring machines
Coordinate measuring instruments ideally should have "interim checks"*1 conducted between "periodic inspections."
Tosei Engineering are the true professionals when it comes to maintenance of measuring instruments, and covers these interim checks on behalf of customers.
This service is available at a lower price and quicker turnover compared to periodic inspections, so feel free to ask us for more details. (*1 JIS B 7440-2)
Compatible machines
PRISMO, ACCURA, etc.
XYZAX Series
Applicable models are subject to certain conditions, so contact the nearest service center for more details.
Never had instruments inspected since they were installed
Verify accuracy efficiently while instruments are in heavy use
Increase frequency of inspections
Excludes manually operated models
Excludes Tokyo Seimitsu's XYZAX mju, XYZAX mju NEX
Excludes Carl Zeiss's DuraMax®
1 Day Service - minimizes impact on customer operations
Service Details
Verify correct operation
Clean sliding surfaces and verify condition
Perform measurement using 100 mm, 300 mm and 500 mm gauge blocks
(The combination of gauge blocks varies depending on the measuring range of the instrument;
maximum 500 mm)
Issue interim check report
This service is not available if a calibration certificate is required. Please request a periodic inspection.
If measuring instruments are found to be in poor condition or require repairs during the on-site service, a different inspection plan will be recommended.